ATS-Series 5600

The Series 5600 is intelligent and feature-rich with all the "extras".

Among the many features of the Series 5600 is a large, capacitor backed user memory base of up to 768K, two full duplex RS232 auxiliary ports and provisions for laser input. An additional DI/DO module with 6 form 'C' relays transforms the Series 5600 into an industrial machinery controller. In addition to operating in standard EIA communication formats, the Series 5600 is also TCP/IP Ethernet 10 base-T compatible. Model 5000 time clocks also come equipped with a bar code wand port and a backlit display and are available with optional battery backups and external bar code readers. Communications options for model 5000 time clocks include RS-232, RS-485, modem, and Ethernet.



2 or 4 Line x 40 Character backlit super-twist LCD


12 or 24 hour-format--USA or international (quartz precision) time stamp of data transactions


Yellow LED low power indicator; two programmable LED indicators, red and green; Diagnostic LEDs for Ethernet communication


Software defined function keys
Large, tactile 45 key, alphanumeric
Custom user defined keypad legends


Dual tone audible annunciator


128k byte of capacitor backed memory; expandable to 768k; 64k flash memory (optional)

Self Test:

ACCU-RATE™ on-board terminal set-up and full feature diagnostics


TCP/IP Ethernet 10-base-T (802.3)
EIA standard RS-232 or RS-485 (2 or 4 wire)
Internal 12/2400 baud modem operation
DI/DO or serial interface printer port


Die cast aluminum housing with steel key-lockable base assembly


+10 to +17 VDC (+12 VDC @ 250 milliamps nominal)
Local, remote or centrally powered
Non-interruptible power source with charger (optional)


Operation: 32° to 110°F (0° to 43°C)


CE Mark certified (CE, RE, ESD, RS and CS), FCC part 15


7.25" l x 11.5" w x 3.4" h. Weight 5.3 lbs.
18.42 cm l x 29.21 cm w x 8.65 cm h. Weight 2.4kg


Integrated or external optical bar code slot readers
Integrated magnetic slot readers
Digital bar code wands
External wand emulation bar code laser and CCD readers
Auxiliary relay or printer interface port